skip to Main Content

Linksys Extender Configuration Setup

Linksys Extender Configuration Setup Page is a local web page which will guide you to New Extender Setup, the extender helps you to extend the wireless signals with unlimited range to extend the Wifi Internet.

Linksys Wifi Extender Configuration Setup



  • Get the extender’s settings credentials.
  • You need to completely reset the range extender.
  • Hold the Reset button located on the panel.
  • Wait before the LED begins to flicker to restore the factory settings.
  • Go through the steps given below to configure the Linksys  Extender configuration setup settings.

Linksys Wifi Extender Configuration Setup Steps

  1. Connect the device to the Wifi range extender Ethernet port using an Ethernet cable.
  2. Attach the range extender to your power outlet. Ensure that the LED light is on and blinking.
  3.  Enter the IP address of the router in the Address bar in any internet browser.
  4. A window will show asking for a username and a password. Leave the name of the user blank and type the admin in the Password field. Choose the Log alternative.
  5. Pick Wireless and click Simple Wireless Settings. Continue the Linksys  Extender Configuration Setup.
  6. Assign the Manual to the radio button and type the name of the network router.
  7. Choose security settings that are identical to those in the wireless security section.
  8. Select the passphrase or WEP key in the search bar and pick Save Settings.
  9. Remove the power cable from the router and the range extender for 30 seconds.
  10. Stop from continuing until the lights are clear, then insert the range extender.

How Does The Linksys WiFi Extender Work?

Wi-Fi extender is a wireless system used to repeat the router’s wireless signals to widen its coverage range with optimized internet access. Linksys Wifi Range Extender Setup functions as a computer that absorbs a Wi-Fi signal from a router and transmits it to areas where there is a minimum signal power.

  • Set it up and follow the guide to install the Linksys Wi-Fi Extender Setup.
  • Find the PUSH button on the extender.
  • To attach the Linksys Wifi Extender to the router, press the button.
  • Using the Spot Finder to locate the unit accurately.
  • After a bit, link to the extended home Wi-Fi network.

Web-Based Setup Page For Linksys Wifi Extender Setup Configuration

  • Open the web browser and view the extension configuration tab. Enter http:/RE6x00-xxx for Windows OS or http:/RE6x00-xxx.local for Mac OS.
  • Choose the Start button on your Windows system. Choose the File Explorer you like.
  • Find the Network icon on the screen and press it in order to configure the Linksys  Extender Configuration Setup.
  • Display the device website by choosing the range extender icon. A popup will ask for the username and password for the admin login.
  • You can navigate the web-based configuration tab. After setting up the tab, press Administration, and pick Factory Settings.
  • Reset the factory settings to complete the setup and method of downloading the Linksys wifi extender. Delete the Linksys extender and turn it off for a few seconds.

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top