skip to Main Content

Linksys Extender Setup Installation Guide.

Linksys Extender for New Extender Setup 

Most people face wifi network issues whenever they move away from the Linksys router device to solve such issues Linksys extender comes into play as it helps you boost your wifi network from your main wifi router. New Extender Setup mainly works by capturing the router’s wifi signal and boosting it to nearby dead spots.

Linksys Extender Setup Installation Guide.


How to connect Linksys wifi Extender to Router:

  1. First, power the extender on, plug it into the power outlet, and connect the extender to the router.
  2. Open the web browser and enter in your web browser’s web address.
  3. You will then be redirected to the New extender setup page and type username and password, then select the network you want to expand.
  4. Click the next button on the screen, follow all display instructions, and hit the finish option.
  5. Now you can set up the Wifi extender and put it where you want an enhanced network.

If you still face problems in the new extender setup, don’t panic! It is a matter of seconds, reach our highly experienced experts quickly.


New Extender Setup: Manual

As mentioned earlier, is used to set up the Extender. New Extender configuration steps are highlighted below:


  • Turn on the Linksys Extender. If not activated, you can not access the Extender login page.
  • Ensure proper plug-in of the extender.
  • Make a connexion between the extender and the smart device to set up the range extender.
  • Turn on the computer with a wall socket.
  • Connect a reliable WiFi network.
  • Open the browser to the extender. Linksys page.
  • Default to open Linksys Extender Setup in your web browser. If not, call our experts at 1-866-988-8965.
  • The two empty boxes are provided for username and password.
  • Complete them accurately and continue.
  • Choose the manual radio button.
  • Enter network router-compatible security settings.
  • Click the network to expand.
  • Check the Save Settings button before leaving the page.
  • If all Linksys WiFi Range Extender lights are green, you’re ready to use the extender.

If all the lights on the extender are on, that means you are on your way. You can now enjoy fast internet in any home or office corner.

New Extender Setup: WPS

To install the New Extender Setup, you can either press the physical WPS button or access the web-based setup page. Steps to configure the extender using WiFi Protected Setup:

The Linksys Extender side panel has a WPS button.

  • Switch on the Range Extender Power.
  • Press button WPS.
  • Connect smart devices to the extender network.
  • You’re there. The WPS extender is now installed.

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top