skip to Main Content

Linksys RE6250 AC750 Extender Setup

Linksys RE6250 Setup AC750 dual-band WiFi range extender with any other network, increasing the range of the current WiFi router or cable modem router. The extender can operate with any WiFi router, including your service provider’s router, providing speeds of up to N300 + AC433 Mbps. You will make the most of its cross-band technology until achieved with the Linksys Extender Setup to optimize the simultaneous use of all bands for hassle-free streaming and gaming and high-speed data transmission.

Linksys RE6250 AC750 WPS Setup Guide

If you are facing any trouble installing your Linksys wifi range extender by manual method then let’s go with the WPS Setup. This is the simplest and quickest way to install Linksys RE6250 range extender. This method is helpful to install your range booster within two minutes only. You can perform Linksys RE6250 WPS setup by pressing a small button only. Let’s see how this process is supposed to be completed.

For Linksys RE6250 WPS setup go through these instructions:

  1. Firstly power on your Linksys RE6250
  2. Locate the WPS button on it.
  3. Press the WPS button on your AC750.
  4. After a few seconds press the same WPS button on your regular wifi device.
  5. Wait for a minute until the WPS LED turns table green.
  6. When it gives a solid green light, unplug your AC750 and place it at your new location where you want to boost up your existing network.
That’s how we can perform Linksys RE6250 WPS setup within a couple of minutes.

Linksys RE6250 WiFi Extender Setup: Manual Process

Follow the measures described below to set up the Linksys RE6250 WiFi extender for AC750 using the Manual Method:

  • First of all, plug in a wall socket and turn on your Linksys AC750 RE6250 dual-band WiFi range extender.
  • Take an Ethernet cable and connect it to the home WiFi network using your Linksys extender setup.
  • Second, power up and connect your PC or laptop to a secure WiFi network.
  • Enable a tab of your choosing on the internet.
  • In the address bar, select extender.linksys.com.
  • Press ENTER.
  • The Linksys RE6250 login page appears after it’s finished.
  • Here the usual username and password need to be entered.
  • Click on the login button after entering the credentials.
  • A sequence of Linksys AC750 setup configuration instructions is shown on the next panel.
  • All you have to do is simply follow them in the exact order defined.This helps you to customize your Linksys RE6250 without a CD. If during the Linksys AC750 extender configuration phase, you experience some sort of technical challenge, feel free to call our experts at any time on customer care number.

How to reset Linksys RE6250?

Linksys RE6250 reset is the process which is supposed to be performed whenever its user forgets his admin password and wants to retrieve it. After performing factory reset on your Linksys AC750 it will automatically delete all your personalized details like admin password, username or SSID and prepare it for the new setup process. In order to perform Linksys RE6250 you will have to grab a sharp pointed object like a toothpick or a paperclip.


For Linksys RE6250 reset go through the steps given below:

  • Plug in your Linksys RE6250 and turn it on.
  • Wait until your AC750 gives solid green light.
  • Locate the factory reset button behind the hole.
  • It may be located at the side panel of your wifi booster.
  • Now grab a toothpick or something like that.
  • Put the toothpick into the factory reset hole and press the reset button for 8-10 seconds.
  • Take the toothpick out and after a few seconds it will automatically reboot.
  • Now your AC750 is ready for the new installation process.

That’s how you can reset your Linksys RE6250.

Linksys RE6250 Firmware update: AC750

Does your AC750 start behaving badly? or is it not delivering the required speed? If yes then you will have to go with the Linksys RE6250 Firmware update. After completing this process you will be able to enjoy the required speed and get the latest security features and other new features which tends to improve the performance of your wifi range booster. In order to perform Linksys RE6250 firmware update you must grab a smart device.


For Linksys RE6250 Firmware update follow the instructions given below:

  1. Firstly download the latest version of firmware on your PC or laptop.
  2. Turn on your AC750.
  3. Now launch a web browser as per your choice.
  4. Get logged in to your Linksys RE6250 extender.
  5. Hit on the firmware upgrade option.
  6. Now click on the ‘choose file’ option.
  7. Select the file that you have downloaded.
  8. Click on the ‘start upgrade’ option.
  9. It will take some time to complete the process meanwhile do not unplug the extender while the upgrade process is under progress.

Linksys RE6250 Troubleshooting steps

Here are some Linksys RE6250 Troubleshooting steps:

  • Keep your Linksys RE6250 away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal items, aluminum studs, and other potential sources of interference.
  • Make sure that the extension is getting enough power from the wall outlet.
  • Check to see if the wiring connections are in good working order or not. Any damaged cable should not be used.
  • Use high-speed internet connection on your smart device.
  • If you’re having trouble logging into your Linksys RE6250 extender, double-check that the URL in the address bar is right.
  • There should be no short-circuit or any damage on the wall socket that you are using.
  • Launch the web browser with the latest version.li>
  • Reset the Linksys RE6250 router.
  • Try setting up your Linksys AC750 RE6250 extender again after a power cycle.
  • Update the firmware time to time on your extender to the most recent Linksys version.

In case you are stuck in any issue regarding your Linksys RE6250 AC750 then you can call us by dialing our toll free number or also by live chat. Our professional technicians are always there (24*7) to help you.


Back To Top