skip to Main Content

Linksys RE7310 extender setup

Are you experiencing WiFi problems in certain areas of your house or workplace? Are poor WiFi connections driving you insane? Let’s get familiar with the Linksys RE7310 setup. You can use your Linksys RE7310 in two ways: as a wireless range extender or as a wired range extender (access point).

Wireless range extenders are devices that repeat current Wi-Fi frequencies. When linked to a router or access point through an ethernet connection, wired range extenders (access points) establish new Wi-Fi hotspots. Both scenarios necessitate the use of a router with an active internet connection. Before you begin, determine whether you want to use your RE7310 as a wireless or wired range extender (access point). This user guide contains instructions for Linksys RE7310 setup.

LINKSYS RE7310 extender setup
Linksys RE7310 LED status

Linksys RE7310  extender Light Status

The light on the RE7310 indicates:

  • No Light (OFF) – This shows that the Linksys extender is powered off.
  • Solid Green  – Linksys RE7310 is ready to utilize.
  • Solid Orange / Red – This indicates that your home router’s connection is weak.
  • Blinking Orange / Red – The repeater is not connected to the router or other networks.

During the Linksys RE7310 Setup procedure, the repeater boosts, restores its factory default settings, changes its firmware, or otherwise shows that WPS is in action.

QUICK TIP: If the repeater’s light is solid orange or red, unplug the extender and move the booster closer to the router; if the light is flipped red, unplug the booster.



Linksys AX1800 extender setup | RE7310

Follow the steps described below for Linksys RE7310 extender setup:

  1. Unbox your RE7310 and plug it into a power outlet.
  2. Go to the wifi manager on your smart device.
  3. Look for a Linksys extender setup network.
  4. After you are connected, navigate to
  5. Now you will see the Linksys AX1800 extender login page.
  6. To continue with the setup process type username and password.
  7. Hit the login button.
  8. Now follow all the on-screen steps to complete the Linksys RE7310 extender setup process.

In case you have any trouble with the Linksys AX1800 extender setup. You can contact us any time on our toll-free number or via live chat. Our professional technicians will help you to fix your issue.

linksys ax1800 setup

How to install my Linksys RE7310 extender with WPS push button?

WPS method is the most uncomplicated and quick process for Linksys RE7310 setup. The user does not have to devote much time to this process. Following the steps below you will be able to complete your RE7310 WPS Setup.

Steps to configure Linksys RE7310 WIFI extender via WPS:

  1. First, unbox the AX1800 extender.
  2. Plug it into a power supply.
  3. Make sure that the Linksys extender RE7310 and the home router should be placed in the same room.
  4. Wait for a couple of minutes until the orange light turns green.
  5. Press the WPS button on your Linksys AX1800 WIFI extender.
  6. After a minute, push the main router’s WPS button.
  7. Wait a few moments until the WPS LED turns solid green.
  8. You are now finished configuring your Linksys RE7310 extender and can relocate it to the desired position.

If you don’t see the WPS button on your home router, try the web browser setup which is explained above.

Linksys RE7310 firmware update

Firmware is an embedded blend of hardware and software that allows your extender to function properly. You will receive firmware update warnings from time to time to get the latest security features and also to resolve issues.

For Linksys RE7310 firmware update follow the steps below:

  1. Get on a wifi enabled smart device like a desktop, laptop, or smartphone.
  2. Launch any web browser of your choice and type in the address bar at the very top of the browser.
  3. Login to Linksys wifi extender setup.
  4. Go to the firmware upgrade option.
  6. Now hit on the UPDATE option.

Note: You can download the latest firmware update file from the official site of Linksys only i.e.

Linksys RE7310 firmware update
Linksys re7310 reset

How do I reset my Linksys RE7310 Extender to factory settings?

If you are facing some technical issues with your Linksys RE7310 wifi range extender, or if you have forgotten your admin password and want to recover it, then you are at the right place. In this blog, we will guide you on how to reset your Linksys RE7310 wifi range extender.

Reset your Linksys RE7310 by following the steps below:

  1. Locate the reset button on your Linksys RE7310 AX1800.
  2. It may be available at the booster’s backside or at the bottom.
  3. Once you’ve found it, push and hold it for 10 seconds.
  4. Finally, restart it to complete the whole reset process.

What are the common issues that a user may encounter during Linksys RE7310 AX1800 extender setup?

  • Linksys extender configuration page not found.
  • There is internet connectivity, but the WiFi extender is not linked.
  • The firmware for Linksys RE7310 cannot be updated.
  • The default login web address is inaccessible.
  • Linksys  extender orange light error.
  • The Linksys extender’s setup page is not functioning.
  • The Linksys extender has no light.
  • It was impossible to locate the Linksys extender’s default IP address.
  • Forgot the default password.
  • The reset process is not done.
  • The extender does not work.
  • connectivity issues with the internet.
  • Attempts to set up the Linksys extender failed.

Troubleshooting steps for Linksys RE7310  extender configuration

  • When setting up your extender, you must first validate its location. Make sure your connectors are positioned properly, away from metal items, electrical equipment, etc.
  • Verify that your extender’s electrical socket is not damaged or experiencing a short circuit. If you experience one of these issues, think about connecting your extender to a different functional wall outlet.
  • Make sure the extender is securely linked to the Internet and that no other Wi-Fi networks are being used locally.
  • The web browser must be accessed.
  • When your Linksys Extender is connected to the network, enter the necessary username and password.
  • Check to see if the extender has an amber green light and flashing power LEDs. You can try to connect to your wireless network once again if your extender displays a red light.
  • Using these troubleshooting techniques, you may then resolve Linksys Extender Setup Installation issues, rapidly connect to your extender, and use the internet without any complications.


Click Here for more information about:

Linksys RE2000 Setup.

Back To Top